Supplies Drawing Tools

In general, the machine is equipped with a compass image
direction of movement can be locked. Ruler also comes
with different scales. Sometimes drawing table is also equipped
grating lines as a pointer coordinates. Similarly, the
AutoCAD, also features tools that function the same
with the drawing tools such equipment. Here's tooltool
which are in AutoCAD:

􀂃 GRID
It is a tool which when enabled will display kisikisi
as a sign of the scale and rotation of the drawing area.
For the settings to large-small lattice spacing, the instructing
GRID on the commandline, it will show a statement
Specify grid spacing (X) or [ON / OFF / Snap / Aspect] <...>: a
offers you to change the spacing of columns and rows.
To enable or disable it on the screen,
You can use the buttons, or by clicking
button on the status bar.

􀂃 SNAP
It is a tool to set the cursor in order to move past the
points scale and rotation at certain intervals. to do
pen-settings of these, instruct SNAP, it would appear
statement Specify snap spacing or [ON / OFF / Aspect / Style / Type]
<...>: Which offers you to change the interval
move the cursor, and rotate the direction melangkahnya. to enable the
on or off, you can use the
or by clicking the button on the status bar.

􀂃 Ortho
It is a tool for conditioning so that the direction of transformation
will take place in line with the cross cursor (not the direction of the
UCS icon). To enable or disable it, can
You use the button, or by clicking the button
on the status bar.

On the right side of the picture, it appears that the lattice is switched

GRID shows the coordinates of the tool has been set at
specific rotation with SNAP tool, so that when Ortho is on,
the vertical and horizontal directions are not in line with
XY axis of the UCS icon, but the direction of the cross cursor.